Publicité
Les langues disponibles
Les langues disponibles
IMPORTANT: After changing the door direction check the door is aligned horizontally and vertically
and that the seals are closed on all sides before fully tightening the top hinge. Adjust the levelling
feet to minimize operating noises caused by vibration.
Energy saving tips
▪ Install the appliance in an appropriate place
▪ The appliance should be located in the coolest area of the room, away from heat
producing appliances or heating ducts, and out of the direct sunlight.
▪ Let hot foods cool to room temperature before placing them inside. An overload will
force the compressor to run longer. Food that freezes too slowly may lose quality, or
deteriorate.
▪ Be sure to wrap foods properly, and wipe containers dry before placing them in the
appliance. This cuts down on frost build-up inside.
▪ Storage bin should not be lined with aluminum foil, wax paper, or paper toweling.
Liners interfere with cold air circulation, making the appliance less efficient.
▪ Organize and label food to reduce door openings and extended searches. Remove
as many items as needed at one time, and close the door as soon as possible.
▪ To ensure that the appliance operates properly, clean the condenser regularly (see
"Routine servicing of your appliance").
▪ Regularly inspect the door seals and ensure that they are still closing properly. If this
is not the case, contact your after-sales service.
32
Publicité
