Frigelux CUBECV40A++ Manuel D'utilisation page 26

USE INSTRUCTIONS
4.
Temperature setting:
Your appliance has one control for regulating the temperature. The temperature control is
located at the bottom of the device.
The first time you put your appliance into operation, set the thermostat in MAX and let it run
empty for 4 hours before storing food for it to cool sufficiently.
The range of the temperature control is from position "MIN" the warmest to "MAX" the
coldest. Adjust the temperature control to the setting that best suits your needs. The setting
NORMAL should be appropriate for home or office refrigerator use.
Appliance thermostat has 3 settings. The appliance assures that temperature is maintained
as long as it is in operation and that it is used in normal conditions of use. The temperature
inside the appliance can be influenced by many factors: ambient temperature, sun
exposure, number of door opening and amount of food stored... The slight changes in
temperature are perfectly normal.
Settings 'MIN' : Freezer compartment average temperature -6 °C~ -10°C
Settings 'NORMAL': Freezer compartment average temperature -15°C~-20°C
Settings 'MAX': Freezer compartment average temperature -20°C~-24°C
In general, we recommend "NORMAL".
To turn the appliance off, turn the temperature control to "0".
NOTE:
▪ Turning the temperature control to "OFF" position stops the cooling cycle but does
not shut off the power to the appliance.
▪ If the unit is unplugged, lost power, or turned off; you must wait 3 to 5 minutes before
▪ Restarting the unit. If you attempt to restart before this time delay, the appliance will
not start.
▪ If you choose to change the thermostat setting, adjust thermostat control by one
numerical increment at a time. Allow several hours for temperature to stabilize
between adjustments.
Do not leave the door open for too long so that the indoor temperature does not rise
too much.
26