Publicité
Les langues disponibles
Les langues disponibles
To external decoder or amplifier
Connect the Coaxial cable for transmission of
digital Audio signals to your playback device or
your amplifier. Enjoy the more realistic sound by
connecting an amplifier and speaker system.
1.
Switch off the device and unplug the power
connection n of the DVB-T receiver and
amplifier.
2.
Insert the audio plug into the socket on the
right-hand side of the device.
3.
Plug the Audio jack into the corresponding
socket on your playback device or your
amplifier.
4.
Install a video connection to a TV set.
5.
Switch on the DVB-T receiver and the amplifier. Select the audio input by the amplifier.
Note:
•
The cable is not part of the accessories.
•
Some of the broadcast's offers digital audio (AC3), but not all.
•
The different audio track during DVB-T broadcast you can switch by using the AUDIO button
on the remote control.
USB Port
Connect the USB flash drive carefully on to the USB port. In
general the label should show the USB stick to the top.
Remove the USB stick only when you are back in Live
DVB-T program, otherwise the drive could be damaged.
Notes:
1.
Due to legal requirements of CE-conformity, the customer is asked to only connect USB-Sticks
to the USB port.
2.
The USB port can be supported up to 16 GB flash memory size. In order to the many different
USB-Sticks and the build-in electronics components a support of all USB-Sticks can not
guaranteed.
3.
Please format the USB-Sticks only with FAT 32 file system. Other file systems are not
supported and can not recognizes by the USB port.
4.
Save all data's from the USB memory before you connect to the device.
14
Connection
HRT 1300
Publicité
