Texas A/S Power Split 801 V Manuel D'instruction page 18

5. Making the log splitter ready
Remove the log splitter from its packing and lubricate the splitting head by its plastic edge.
The splitting plate can be adjusted in two heights:
1 = Splitting length 55 cm
2 = Splitting length 104 cm
On both sides of the handles arms have been
mounted to fasten the logs when the piston moves back.
Mounting of the wire at the inlet.
Push the red safety stop button back and
the lid can be opened.
Hereinafter the machine can be started
when the safety button is pressed down, the
machine stops.
18
1
2