Elevation - Stanley Compulevel Manuel D'utilisation

47855 CompuLevel

Elevation

ELEV
ELEVATION lets you preset the display to a benchmark elevation in
engineers (FT) or metric scales for use in the CARRY function.
To enter or exit the ELEV function, press and hold the SCALE and RES keys
together for two seconds.
Notes: It's best to set digits starting with the least significant: momentarily
press the HOLD key to set the hundredths digit, press the MARK key to set
tenths, the REC key for ones, the CAL key for tens, the SCALE key for
hundreds and the RES key for thousands. Press the ZERO key to select up
or down.
To use your preset elevation, exit ELEVATION and enter CARRY
(see page 16).
ELEV
E for elevation
Example reading: 17,469.80 (a very high elevation!)
End set here
6/11/07 11:14
Allows preset of elevation in CARRY function.
First place measurement module at benchmark.
Press 2 seconds
RES
Display looks like CARRY function:
10' 1'
1000' 100'
Page 20
to Enter or Exit
SCALE
Alternates
0.1' 0.01'
ON
UP
DOWN OFF
Compulevel TM Measurement system • 20
Upper display
Lower display
Start set here