Stanley Compulevel Manuel D'utilisation page 19

47855 CompuLevel
A pocket PC can be connected to the serial port to store, graph or
tabulate each measurement as it is taken for an unlimited number of
measurements. The position display will show (FXXX) after the
COMPULEVEL TM
Press the ZERO key for two seconds to back step and clear a previous
measurement, then momentarily press and release to clear additional
measurements.
Press the REC and ZERO keys together for two seconds to clear all
measurements.
The REC DATA function can be used while in the CARRY function to record
data with each press of the HOLD key. CARRY data and normal data won't
mix – storing one will delete all other data.
REC
DATA
Click to record
HOLD
Sample position display
To start
Press 2 seconds to enter
REC MARK
Press 2
seconds to
ZERO
clear all data
if needed
6/11/07 11:14
memory is full.
Saves up to 137 measurements, or an
unlimited number with pocket PC.
Take measurements over a grid of regular surface
intervals for a contour or 3D map.
One sequence can define a profile or section.
Press
ZERO
Page 18
2 seconds, back space (erase)
Press MARK 2 seconds to start a new sequence
Compulevel TM Measurement system • 18