Publicité
Les langues disponibles
Les langues disponibles
6-2. Paper Loading Methods
This printer has two paper loading methods: one when using the roll paper shaft,
and one when not using the shaft. The roll paper shaft is not used for drop-in paper
loading. Select the paper loading method from the following table according to
the type of paper used.
Paper width (mm)
Paper thickness ( µ m)
65
Thickness < 80
80
Thickness
120 < Thickness
Note:
*1: Maximum outer roll diameter: 150 mm
*2: Maximum outer roll diameter: 170 mm
*3: Maximum outer roll diameter: 180 mm
*4: The print speed must be changed from the high speed (factory default
setting) to the middle speed (140 mm/sec.). To change the print speed, use
the print speed settings command <ESC><RS> Rn. Refer to the separate
Specification Manual for details.
44.5
Width < 79.5
Use roll paper shaft (*1, *4)
120
Use roll paper shaft (*1, *4)
150
Use roll paper shaft (*1)
– 21 –
79.5
Width
82.5
Use roll paper shaft (*2)
Use drop-in loading (*3)
Use roll paper shaft (*1)
Publicité
