VALBERG WF 812 B W180C Consignes D'utilisation page 25

C
Cleaning and maintenance
IMPORTANT: Ensure that the water has cooled before
draining the appliance.
1. Stop the appliance and unplug it.
2. Insert removal tool like slotted screwdriver into the small
opening of bottom baffle, press the bottom baffle downward
with much strength and open it.
3. Put a flat container under filter door and then drain with
emergency drain pipe (see [draining residual water] for specific
operation methods). Then, loosen filter anticlockwise and
completely unscrew and remove the filter.
4. Clean the filter and the filter chamber.
5. Check that the pump rotor moves freely.
6. Re-insert the filter and screwit in clockwise as far as it will go.
7. Reinstall the plinth.
23 EN