Publicité
Les langues disponibles
Les langues disponibles
B
Product usage
Inlet water warning
If tap is not opened, or water pressure is over low, display screen will prompt "F01" to give alarm.
Drainage warning
If the pipe is squeezed, drainage will not be smooth. In case of failing to completely drain for
long time, display screen will prompt "F03" to give alarm.
Door lock icon
After the program starts the Door Lock icon will light up and the door will be locked.
•
After completing program, door lock unlocks automatically. When the washing machine
is paused, if the door lock opening conditions are met, the door lock will open.
•
When door lock indicator light flashes, door shall not be opened forcibly so as to avoid
personal injury.
Delay end function
Delay end function allows to run the machine at the consumers' convenience, for example,
at night when electricity is cheaper.
•
Only under the standby mode, this button is valid for selecting the reservation time.
•
After the reservation function is selected, the time will increase lh when each time the
reservation button is pressed. Before reservation, if the program time does not satisfy the
integral multiple of 1h, it shall be completed by pressing the reservation key for the first
time, and then the time increases 1h when each time the reservation button is pressed.
If the reservation is selected, before the program runs, the current reservation can be
canceled by turning the button to select other programs.
•
The delay time must be longer than the wash program length as the delay time is the
time program will finish. For example: if the selected program time is 02:28, the delay
time selected must be between 03:00 and 24:00.
•
When the reservation process is operated, the icon of 'reservation time' will be on. When
the reservation process is finished, the icon of 'reservation time' will be off.
Favourite
After selecting the program and setting each parameter and starting, long press the Favorite
key for 3 s to memorize the selected program, temperature, rotational speed and other
related settings, and then the Favorite symbol lamp will be on Under the circumstance that
the Favorite lamp is not on, short press the Favorite key, then the program will be switched
to the program memorized last time; and meantime, the temperature, rotational speed and
other parameters will automatically change into the parameters memorized last time.
At this moment, if switching the program or pressing other keys, the panel will display a new
program and parameters, and the Favorite symbol lamp will be off.
When the user uses it for the first time, if he/she has never long pressed the Favorite key to
collect programs, he/she can short press the Favorite key and then the cotton linen program
and its default settings will be collected by default.
Mute function
When the machine is in the state of holding, pause or operation, press "Spin + Favourite"
buttons for 2 seconds, The display will show mute function fault icon. All the buzzing will be
turned off except the alarms.
19
EN
Publicité
