Publicité
Les langues disponibles
Les langues disponibles
Cleaning and care
Do not use high-pressure cleaners or steam jets. Only
clean the drawer when the appliance is switched off.
Function selector Setting = 0.
Appliance exterior
Wipe the appliance with water and a little detergent.
Then dry it with a soft cloth.
Caustic or abrasive cleaning products are not suitable.
If a caustic or abrasive substance comes into contact
with the frontage, wash it off immediately with water.
Troubleshooting
Malfunctions often have simple explanations. Please read the following instructions before calling the after-sales
service:
The ovenware or food remain cold.
The ovenware or food are not warmed sufficiently.
The "power on" indicator light flashes.
The indicator light flashes rapidly when the warming
drawer is closed.
The "power on" indicator light does not light up.
The fuse in the fuse box has blown.
Repairs must only be carried out by qualified specialists. Incorrect repairs may result in serious injury to the user.
10
Stainless steel surfaces
Always remove any spots of limescale, grease, cornflour
and egg white immediately. Corrosion can form under
such spots. Clean the appliance using water and a little
detergent. Then dry the surface with a soft cloth.
Appliances with glass fronts
Clean the glass front with glass cleaner and a soft cloth.
Do not use a glass scraper.
Heating plate
Clean the heating plate using warm water and a little
detergent.
Check whether:
▯
the appliance is switched on
▯
there has been a power cut
▯
the drawer is closed completely
This may indicate that:
▯
the ovenware or food were not warmed for a sufficient length of time
▯
the drawer was left open for a long time
Check whether the drawer is closed.
Call the after-sales service.
The indicator light is faulty. Consult the after-sales service
Disconnect the appliance at the mains and consult the after-sales service.
Publicité
