Publicité
Les langues disponibles
Les langues disponibles
Menu operations
Menu item
USB *10
iPod Switch *11
(iPod/iPhone control)
Audiobooks *11
Phone *13
Audio
Application
BT Audio
Switch *14
Delete Pairing
Phonebook
Trans
Set PIN Code
Auto Connect
Initialize
Information
Ext Input *16
AM Source *16
AUX Source *16
Bluetooth
Audio *17
Software Version
*10 Displayed only when the source is "USB-1/USB-2".
*11 Displayed only when the source is "iPod-1/iPod-2".
*12 If the USB Bluetooth Adapter is not connected to the unit, "Please Connect BT Adapter"
appears on the display.
*13 <Connect> will not be displayed if two Bluetooth phones are connected at the same time.
*14 Displayed only when the source is "BT-1/BT-2".
*15 Displayed only when a Bluetooth phone/audio player/application is connected.
*16 Displayed only when the unit is in any source other than the corresponding source "Ext Input/
AM Source/AUX Source".
*17 Displayed only when the USB Bluetooth Adapter (KS-UBT1) is attached and current source is
not "BT-1/BT-2".
26
| ENGLISH
Selectable setting (Initial: [XX])
Drive Change: Selects to change the drive when a device with multiple
drives is connected to the USB input terminal.
[Headunit Mode]/iPod Mode/Application Mode:
For settings,
page 12.
Normal/Faster/Slower: Selects the playback speed of the Audiobooks
sound file in your iPod/iPhone.
Initial selection depends on your iPod/iPhone setting.
Connect/Disconnect: Connects or disconnects the Bluetooth phone/
audio device. (
page 16)
Connect/Disconnect: Connects or disconnects the application in the
smart phone. (
page 17)
Switches between "Bluetooth Audio" and "Bluetooth Pandora".
For settings,
page 17.
Copies up to 400 numbers from the phonebook memory of a connected
phone to the unit via OPP.
Changes the PIN code (1 to 6-digits). (Default PIN code: 0000)
Turn the control dial to select a number, press
position. After entering the PIN code, press the control dial to confirm.
[On]: Establishes connection automatically with the Bluetooth device when
the unit is turned on.
Off: Cancels.
[No]: Cancels.
Yes: Initializes all the Bluetooth settings (including stored pairing,
phonebook, and etc.).
Connected Phone/Connected Audio/Connected App Mode *15:
Displays connected phone/audio/application device name.
My BT Name: Displays the unit name (JVC Unit).
My Address: Shows address of USB Bluetooth Adapter.
Show/[Hide]: Enables or disables "EXT IN" in source selection.
[Show]/Hide: Enables or disables "AM" in source selection.
[Show]/Hide: Enables or disables "AUX In" in source selection.
[Show]/Hide: Enables or disables "BT Audio" in source selection.
Displays the firmware version of the unit.
/
to move to the entry
Publicité
