Publicité
Les langues disponibles
Les langues disponibles
Bluetooth mobile phone
Using the Settings menu
1 Enter the "Hands-Free" menu.
2 Select <Settings>.
The following settings are applicable to the paired device. If another device is paired, perform the
settings again.
Menu item
Phonebook
Select *
Auto Answer
Ringing Tone
Ringing Color
NR/EC Mode
MIC Setting
Message Notice
* Selectable only when the connected phone supports PBAP.
20
| ENGLISH
[In Phone]: The unit browses the phonebook of the connected phone.
In Unit: The unit browses the phonebook registered in the unit. (You can copy
the phonebook memory using <Phonebook Trans> (
On: The unit answers incoming calls automatically.
[Off]: The unit does not answer incoming calls automatically.
[In Unit]: The unit rings to alert you when a call/text message comes in.
– Call Tone: Select your preferred ring tone (Tone 1 — 5) for incoming calls.
– Message Tone: Select your preferred ring tone (Tone 1 — 5) for incoming
text messages.
Default ring tone is different according to the paired device.
In Phone: The unit uses the connected phones' ring tone to alert you when a
call/text message comes in. (The connected phone will ring if it does not
support this feature.)
Color 01 — 29 [06]: Select your preferred color for incoming call/text message
alerts.
Off: Cancels.
[On]: Turns on the Noise Reduction and Echo Cancellation of the connected
microphone for clearer sound.
Off: Cancels.
Level (01— 03) [02]: The sensitivity of the microphone increases as the MIC
level is increased.
[On]: The unit rings and "[Device Name]" "Received Message" appears to alert
you of an incoming text message.
Off: The unit does not alert you of an incoming text message.
3 Repeat this step to perform the necessary
settings.
To return to the previous menu, press
To exit from the menu, press MENU.
Selectable setting (Initial: [XX])
.
page 26).)
Publicité
