Publicité
Les langues disponibles
Les langues disponibles
To connect cable TV with a
converter/descrambler box:
•
Use the following illustration to connect a
converter/descrambler box. (The RF switch
and the signal splitter are not provided.)
Set the RF switch to the A position to watch
unscrambled channels using your TV remote
control. Set the RF switch to the B position to
watch scrambled channels using the
converter/descrambler controls.
RF switch
A
B
Out
Cable converter/descrambler box
Connecting a sound system
Use the following illustration to connect an audio
processor or Hi-Fi system.
Warning
Make sure that you turn off and unplug your TV before
installing devices.
Note
For home theater systems, use an S/PDIF cable to achieve full
sound capabilities.
Audio processor
Hi-Fi system
10
Connecting a VCR
Note
Two-set signal
Warning
splitter
In
Y=yellow (video)
W=white (audio left)
R=red (audio right)
S/PDIF cable
S/PDIF IN jack
www.insignia-products.com
Insignia NS-LCD27FS 27" LCD TV
You can connect a VCR with a standard
audio/video cable or with a S-Video cable. The
S-Video cable does not carry sound. If you use
an S-Video cable, you need to use an audio
cable to connect sound.
For better video, use the S-Video jack if your VCR has an
S-Video connection.
Make sure that you turn off and unplug your TV before
installing devices.
Use the following illustration to connect a VCR.
TV
S-Video cable
OR
Video cable
Audio cable
Y
W
ANT OUT
VIDEO
L- AUDIO - R
VIDEO
L- AUDIO - R
VCR
To play the VCR:
1 Turn on your TV.
2 Press the INPUT button one or more times to
select Composite1 (or S-Video if you
connected the VCR to the S0-Video jack).
3 Turn on your VCR.
4 Insert a videotape, then press the PLAY
button.
R
S-VIDEO
ANT IN
Publicité
