Playing Songs On Ipod; Basic Operations - Pioneer DEH-P4900IB Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Operating this unit
For CD TEXT discs
Play time—disc artist name and track title—
disc artist name and disc title—disc title and
track title—track artist name and track title—
track title and play time
For WMA/MP3/AAC discs
Play time—folder name and file name—artist
name and track title—artist name and album
title—album title and track title—track title
and play time—comment and play time—bit
rate and play time
For WAV discs
Play time—folder name and file name—sam-
pling frequency and play time
Notes
! You can scroll to the left of the title by pressing
and holding DISPLAY.
! Audio CD that contains certain information
such as text and/or number is CD TEXT.
! If specific information has not been recorded
on a disc, title or name is not displayed.
! Depending on the version of iTunes
write MP3 files onto a disc, comment informa-
tion may not be correctly displayed.
! Depending on the version of Windows Media
Player used to encode WMA files, album
names and other text information may not be
correctly displayed.
! When playing back VBR (variable bit rate)-re-
corded WMA files, the average bit rate value is
displayed.
! When playing back VBR (variable bit rate)-re-
corded MP3 files, VBR is displayed instead of
bit rate value.
! The sampling frequency shown in the display
may be abbreviated.
! When Ever Scroll is set to ON at the initial set-
ting, text information scrolls continuously in
the display. Refer to Switching the Ever Scroll
on page 23.

Playing songs on iPod

Basic Operations

You can use this unit to control an iPod by
using a cable (e.g., CD-I200), which is sold se-
parately.
1 Song number indicator
2 RPT indicator
Shows when repeat range is selected to ONE.
3 RDM indicator
Shows when random play is selected to
SHUFFLE SONGS or SHUFFLE ALBUMS.
4 Play time indicator
1
Connect the iPod to this unit.
Playback will automatically start.
While the iPod is connected to this unit,
®
used to
PIONEER (or
the iPod.
# Before connecting the dock connector of this
unit to the iPod, disconnect the headphones from
the iPod.
# After the iPod has been connected to this
unit, press SOURCE to select the iPod.
# When removing the iPod from this unit, this
unit is turned off.
2
To perform fast forward or reverse,
press and hold c or d.
3
To skip back or forward to another
song, press c or d.
Notes
! Read the precautions with iPod on page 36.
! If an error message such as ERROR-11 is dis-
played, refer to Understanding error messages
on page 34.
! Connect directly the dock connector of this
unit to the iPod so that this unit works prop-
erly.
(check mark)) is displayed on
Section
02
15
En

Publicité

Table des Matières
loading

Table des Matières