Publicité
Les langues disponibles
Les langues disponibles
CONTROLS
Cooking in phases
Auto
Auto
Auto
Preferably use the oven grid when preparing meals. Never
place cold (frozen) meals directly on the glass turntable.
The difference in temperature may cause it to crack!
You can set a maximum of two phases in a cooking programme. If
defrost is a phase in a cooking programme, you should input this
first. A beep will sound when the first phase is ready, the second
phase starts automatically after the first phase.
Example
You would like to defrost food for 5 minutes, followed by cooking
for 7 minutes on 80% power.
1. Press twice on the defrost button.
'd-2' flashes in the display.
2. Turn the control dial to set 5 minutes defrost time.
The display indicates the set time.
3. Press once on the function button.
'P100' flashes in the display.
• Press again on the function button to set 80% power.
• You can use the control dial to set 80% power by turning
the dial.
4. Press the start button.
The selected power is now confirmed.
5. Turn the control dial to set 7 minutes.
The display indicates the set time.
6. Press the start button again.
The microwave switches on and the set time for the first phase
counts down in the display. The defrost symbol flashes in the
display.
• When the set time is reached, the set time of the second
phase appears in the display and the microwave symbol
flashes.
• When the set time of the second phase has been reached,
the current time appears again in the display, and you will
hear 5 beeps.
EN 15
Publicité
