PACKING LIST
This product requires no assembly
•
20V Hedge Trimmer
•
Blade Guard
•
20V 2Ah Battery (WE20VRB)
•
20V Charger (WE20VCH)
•
Instruction Manual
If any parts are damaged or missing, please
call 1-855-378-6903 for assistance.
BATTERY REMOVAL
1. Press in and hold the latch button (1) with
firm grip.
2. Grasp the trigger handle (2) firmly. Pull the
battery pack out of the handle.
BATTERY INSTALLATION
1.
Align the tongue (3) of the battery pack
with the cavity in the handle housing.
2.
Grasp the trigger handle (2) firmly.
3.
Push the battery pack into the handle
until both sides lock. The latch button will
click when locked into place.
4.
Do not use force when inserting the
battery pack. It should slide into place
and click.
ASSEMBLY
2
3
1
NOTE: The battery pack fits snugly into the
handle to prevent accidental dislodging. It
may require a strong pull to remove.
IMPORTANT
: The battery is not shipped fully
charged. It is recommended that the battery
be fully charged before initial use. With
regular use, the battery pack will take 4 hours
or less to charge fully. It is recommended that
the battery be charged every 3 months when
the hedge trimmer is not in use. The battery's
run time will improve after the third or fourth
charge.
IMPORTANT
: DO NOT remove the blade
assembly. If the blade needs sharpening,
straightening, or replacing take it to an
authorized repair center.
WARNING:
•
Handle the blade with care.
•
Do not place your fingers or hand near or
between the notches in the blade or in any
position where they could get pinched or
cut.
•
Never service the blade or hedge trimmer
unless the battery pack is removed.
•
Always keep both hands on the hedge
trimmer handles to prevent your hand from
touching the blade.
8
To avoid personal injury: