Publicité
Les langues disponibles
Les langues disponibles
Followed by 'Ex' (explosion proof)
e.
Suitable for or:
II (Gas group II)
III (Dust group III)
Our marine (MR) winches have a higher ignition energy (IIB) in the gas group than our worm gear and spur gear (WW/TL) winches (IIC).
The ignition energies of the dust group are the same for all types of winches, namely IIIC.
f.
Temperature class for or:
T4 (temperature <135 ºC), T135 ºC (temperature <135 ºC)
T3 (temperature <200 ºC), T200 ºC (temperature <200 ºC)
Our worm gear and marine (WW/MR) winches are T4 marked. Our spur gear (TL) winches have a T3 marking.
g.
Equipment Protection Level:
Gc (gas) or Dc (dust)
h.
Ambient temperature (ambient) for use from -20ºC up to 70 ºC
4. Maintenance
The winch must be unloaded for inspection and maintenance tasks. Inspection and maintenance tasks must be performed by skilled personnel, e.g.
via your Gebuwin dealer.
Inspection/
Tasks
Maintenance interval
Before each use
-
-
-
Per quarter
-
-
-
Replace the brake discs as needed
Be careful: Do not get any grease on the brake discs or preceding surfaces
Annually
-
-
-
-
* Texaco 'Texclad premium 2' is recommended by us for the worm wheel gearing (or equivalent). Orders can be placed through your Gebuwin dealer or on the
website: www.gebuwin.com.
5. Troubleshooting
Trouble/Malfunction
The unloaded winch rotates heavily
The load cannot be held
The load pressure brake does not
function
6. Service
For servicing and/or servicing parts contact your nearest Gebuwin dealer. The exploded view diagram with regard to the servicing parts is available on our
website www.gebuwin.com. Orders for any necessary servicing parts can also be placed on the website.
Use original servicing parts only, correct functioning cannot otherwise be guaranteed!
7. Environment
At the end of the winch's lifespan, the various winch parts must be disposed of according to the current environmental regulations.
8. Guarantee
Gebuwin B.V. guarantees for a period of 2 years the materials and workmanship of the Gebuwin hand driven winches with the exception of the economy line
HW type winches. The HW type winches and all electrical winches (e-W/EW and LS) and parts have a guaranty period of 1 year on materials and workmanship.
visually check cable and loading hook
for TW type winches check amount of grease* on the worm wheel gearing
check the brake function
visually check cable and loading hook for any fracture
grease the worm - worm wheel gearing
check both load pressure brakes for wear and tear
check the cable according to DIN 15020 pg. 2 for wear and tear; also test and maintain the minimum breaking
force.
check the tightness of the mounting bolts
check all the winch parts for wear and tear; replace where necessary; grease where needed.
check the type identity sticker for clarity
Cause
-
no grease on the gearing
-
dirt on the gearing
-
during mounting the winch has pulled
askew
-
the cable has been incorrectly wound round
the drum which means the crank turning
direction is incorrect
-
the brake discs are either worn down or
faulty
-
braking mechanism and/or discs are
jammed due to infrequent use
Solution
-
apply grease
-
clean with a detergent and re-grease
level the mounting surface and re-mount the
-
winch
-
wind the cable correctly around the drum
check and/or renew the brake discs
-
-
loosen the brake by hitting the crank in the
correct turning direction with the flat of the
hand
Wijzigingen voorbehouden / Subject to alterations / Änderungen vorbehalten /
Toutes modifications réservées / Med forbehold om endringer
8
Publicité
