ARDES AR5PR4003 Mode D'emploi page 16

1; F2: speed 2; F3: speed 3; F4: speed 4; SF: sleeping mode.
TIMER Button (C) (G for 3 seconds):
When the unit is operating, press this button to set the timer to switch off
the fan automatically after from 1 to 9 hours.
Press the (C+), (C-) or (G) button to change the switch-off time by 1h.
The display will show the set time in hours.
To deactivate the timer function press timer button until the display will
show "0h" or turn the fan off manually.
SWING Button (D) (G):
Press this button when the unit is on to activate the automatic oscillation
from left to right.
To deactivate the automatic oscillation press again this button.
LIGHT Button (E) - only on remote control:
Press this button when unit is on to turn the display light off; press again
to turn the light of display on.
VERTICAL SLOPE:
You can vertically point the front of the fan
choosing the desired angle. It is sufficient to
move the front of the fan up or down according
to the desired slope.
MAINTENANCE
Before carrying out the regular cleaning operations turn off the fan
and unplug it.
Ensure that the fan is switched off from the supply mains before
removing the guard.
For external cleaning use a soft and dry cloth.
DO NOT dip the device in water, or splash it with any other liquids.
DO NOT use solvents or any other chemical products for cleaning it.
Reinstall the guard after cleaning and before connecting the plug
tot he mains.
When you do not use it, after cleaning it, store the fan in a dry place.
16