Publicité
Les langues disponibles
Les langues disponibles
See images at the end of the manual.
1. Front grille
2. Lock ring of the fan
3. Safety screw of the fan
4. Fan
5. Lock ring of the back grille
6. Back grille
INSTRUCTIONS FOR USE
Place the fan on a flat, dry and stable surface, and insert the plug of the
fan in a socket; the unit will emit a short "BIP" sound indicating that power
is supplied.
For your convenience the unit can be operated by using control panel in
the main body or using remote control included (see images at the end
of the manual).
Pushbuttons:
A. On/Off
B. Speed
C. Timer
D. Swing
E. Light
F. Display
G. Swing/Timer
Batteries
Remote control is supplied without batteries; before use remote control
open the batteries holder placed on the back of remote control (refer to
the diagram shown on the back of the remote control) and insert 1 battery
CR2025 3V respecting the indicated polarity.To remove the battery, refer
to the diagram shown on the back of the remote control.
ON/OFF Button (A):
Press Power - On/Off button one time to activate the fan. The unit will
start to operate at lower speed.
Press Power - On/Off button when unit is on to turn it off.
SPEED/SLEEPING MODE Button (B):
Press this button when unit is on to select the desired speed: F1: speed
ASSEMBLING
7. Motor shaft
8. Motor
9. Control panel
10. Rod
11. Base
12. Safety hook
15
Publicité
