Initial Settings; Adjusting Initial Settings; Setting The Time - Pioneer KEH-P4020 Mode D'emploi

Initial Settings

Adjusting initial settings

Initial settings lets you perform initial set up of
different settings for this unit.
1 Press
SOURCE
off.
2 Press and hold until
AUDIO
in the display.
Press repeatedly to switch between the
AUDIO
following settings:
—
TIME AUX
Use the following instructions to operate each
particular setting.
• To cancel initial settings, press
• You can also cancel initial settings by holding
down until the unit turns off.
AUDIO
19 En
and hold until the unit turns
appears
TIME
.
BAND

Setting the time

This is used to set the time on the unit's clock
display.
1 Press to select the time.
AUDIO
Press until the time appears in the dis-
AUDIO
play.
2 Select the portion of the time display you
wish to set with 2/3.
Pressing 2/3 will select a portion of the clock
display:
—
HOUR MINUTE
As you select portions of the clock display the
portion selected will blink.
3 Select the correct time with 5/∞.
Pressing 5 will increase the selected hour or
minute. Pressing ∞ will decrease the selected
hour or minute.