Techno Line WT536 Mode D'emploi page 20

WT536 Manual
 Time zone setting (± 12h)
 Manual time setting
 Projection of the time
 Date and weekday display (7 languages)
 Temperature alternatively in °C or °F
 Alarm and automatic snooze function
 Indoor measurement range: -9.9°C ~ 49.9°C
 Power: DC-adapter HX0180450150D2E (included),
battery 1.5V "AAA" LR03 size x 2 pcs (not included)
Initial operation
 Connect the included power supply with the socket on the backside
 Alternatively you can use batteries. Open the clocks battery compartment cover.
 Insert 2 x AAA batteries observing polarity [ "+" and " –" marks].
 When you insert the batteries, all icons on the LCD display will light up for 3 seconds, you
will hear a beep tone and the clock detects indoor temperature.
 Then the clock will enter the radio controlled time signal reception mode.
Projection function:
 Continuous projection is only possible by using the power adapter
 Press the projection rotate button (below the "+" button) to turn the projection.
EN6