Siemens KIL Serie Notice D'utilisation page 52

Cleaning the appliance
Clean the appliance as specified to
ensure that it is not damaged by in-
correct cleaning or unsuitable clean-
ing products.
WARNING
Risk of electric shock!
¡ An ingress of moisture can cause
an electric shock.
Do not use steam- or high-pres-
▶
sure cleaners to clean the appli-
ance.
¡ Liquid in the lighting can be dan-
gerous.
The rinsing water must not run
▶
into the light.
ATTENTION!
¡ Unsuitable cleaning products may
damage the surfaces of the appli-
ance.
Do not use hard scouring pads
▶
or cleaning sponges.
Do not use harsh or abrasive
▶
detergents.
Do not use cleaning products
▶
with a high alcohol content.
¡ If you clean fittings and accessor-
ies in the dishwasher, this may
cause them to become deformed
or discolour.
Never clean shelves or contain-
▶
ers in the dishwasher.
Prepare the appliance for cleaning.
1.
→ Page 46
Clean the appliance, the fittings
2.
and the door seals clean with a
dish cloth, lukewarm water and a
little pH-neutral washing-up liquid.
Dry thoroughly with a soft, dry
3.
cloth.
Insert the fittings.
4.
Electrically connect the appliance.
5.
Switch on the appliance.
6.
→ Page 41
Cleaning and servicing en
Putting the food into the appliance.
7.
Cleaning the condensation
channel and drainage hole
Regularly clean the condensation
channel and drainage hole to ensure
that the condensation can drain.
Carefully clean the condensation
▶
channel and the drainage hole,
e.g. using a moistened cotton bud.
→ Fig.
3
Removing the fittings
If you want to clean the fittings thor-
oughly, remove these from your ap-
pliance.
Removing the shelf
Lift the shelf, pull it out, lower it
▶
and swing it out to the side.
→ Fig.
4
Removing the bottle shelf
Pull out and remove the bottle
▶
shelf.
→ Fig.
5
Removing door racks
Lift the door rack upwards and re-
▶
move it.
→ Fig.
6
Removing the fruit and
vegetable container
Pull the container out all the way.
1.
Lift the container at the front
2.
remove it ⁠ .
→ Fig.
7
and
47