Publicité
Les langues disponibles
Les langues disponibles
МАЗ САЛО
1. Do not attempt to disassemble the camera.
To
prevent
electric
shock,
do
not remove
screws Or covers.
There are no user serviceable parts inside.
Ask a qualified service person for servicing.
2. Handle the camera with care.
Do not abuse the camera.
Avoid striking,
shaking, etc. The camera could be damaged
by improper handling or storage.
3. Do not expose the camera to rain or
moisture, or try to operate it in wet areas.
Turn the power off immediately and ask a
qualified
service
person
for
servicing.
Moisture can damage the camera and also
create the danger of electric shock.
4. Do not use strong or abrasive detergents
when cleaning the camera body.
Use a dry cloth to clean the camera when
dirty.
In case the dirt is hard to remove, use a mild
detergent and wipe genily.
5. Clean the CCD faceplate with care.
Do not clean the CCD with strong or abrasive
detergents, Use lens tissue or a cotton tipped
applicator and ethanol.
6. Never face the camera towards the sun.
Do not aim the camera
at bright objects.
Whether
the camera
is in use or not, never
aim it at the sun or other extremely bright
objects. Otherwise,
blooming
or smear
may
be caused.
7. Do not operate the camera beyond the
specified temperature, humidity or power
source ratings.
Use the camera under conditions where tem-
perature is between
-10°C
- +50°C
(14°F -
122°F}, and humidity is below 90 %.
The
input power source is 120 V AC 60 Hz for
WV-CP230, 12 V DC for WV-CP232, and 24 V
AC 60 Hz for WV-CP234,
Caution:
To prevent fire or electric shock hazard, UL
listed wire VW-1, style 1007 should be used
for the DC 12 V or AC 24 V Input Terminal.
Publicité
