Getac V200 Manuel De Fonctionnement page 5

Operating in Tablet Mode
1. Open the top cover so that it is almost
perpendicular with the keyboard of the
computer.
2. Turn the display counter-clockwise by
o
165 .
3. Close the computer with the display
facing up.
4. Lift the cover latch and engage the clamp
on the display. Then, push in the cover
latch to click it into place.
Taking Care of the Computer
Location Guidelines

For optimal performance, use the com-
puter where the recommended tempe-
rature is between 0 C (32 F) and 55 C
(131 F) – actual operating temperature
depending on product specifications.

Avoid placing the computer in a location
subject to high humidity, extreme tempe-
ratures, mechanical vibration, direct sun-
light or heavy dust. Using in extreme
environments for long periods can result
in product deterioration and a shortened
product life.

Operating in an environment with metallic
dust is not allowed.

Place the computer on a flat and steady
surface. Do not stand the computer on its
side or store it in an upside-down position.
A strong impact by dropping or hitting
may damage the computer.

Do not cover or block any ventilation
openings on the computer. For example,
do not place the computer on a bed, sofa,
rug, or other similar surface. Otherwise,
overheating may occur that results in
damage to the computer.

As the computer can become very hot
during operation, keep it away from
objects that are vulnerable to heat.

Keep the computer at least 13 cm (5 inches)
away from electrical appliances that can
generate a strong magnetic field such as a
TV, refrigerator, motor, or a large audio
speaker.

Avoid moving the computer abruptly from
a cold to a warm place. A temperature
difference of more than 10 C (18 F) may
cause condensation inside the unit, which
may damage the storage media.
General Guidelines

Do not expose your skin to the computer
when operating it in a very hot or cold
environment.

Do not place heavy objects on top of the
computer as this may damage the display.

The screen surface is easily scratched.
Avoid touching it with a sharp object such
as a pen or pencil.

LCD image sticking occurs when a fixed
pattern is displayed on the screen for a
prolonged period of time. You can avoid
the problem by limiting the amount of
static content on the display. It is recom-
mended that you use a screen saver or
turn off the display when it is not in use.

To maximize the life of the backlight in
the display, allow the backlight to auto-
matically turn off as a result of power
management.
3