Interline 59695230 Instructions De Service page 37

»
If you are not familiar with your pool filtering system and
heater:
A. Do not attempt to adjust or service without consulting
your dealer, professional pool or air conditioning
contractor.
B. Read the entire installation and users guide before
attempting to use, service or adjust the heater or pool
filtering system.
Note: Turn off power to the unit prior to attempt service or
repair.
Problem Cause
Heat pump doesn't work 1. No electricity
2. Heat pump off
3. Wrong temperature
4. Bypass not set
5. No gas pressure
6. Time delay still active
7. Air temperature below 8 degrees
Insufficient heating
1. Blocking of the air
2. Ice formation on the evaporator
3. Bypass not set
4. Too high water flow
Solution
1. Turn on the power
2. Turn on the heat pump
3. Set the correct temperature
4. Set the bypass
5. Contact your installer
6. Wait until the heat pump starts
7. Wait until it gets warmer
1. Remove the obstacles
2. Switch off the heat pump temporarily
3. Set the bypass
4. Set the bypass
37