Publicité
Les langues disponibles
Les langues disponibles
NOTE: The flashing red dot next to power level indicator means the timer indicator is
showing time of the heating zone.
If you want to check the set time of other heating zone, touch the heating zone selection
control. The timer will indicate its set time.
2. When cooking timer expires, the corresponding cooking zone will be
switch off automatically and show "H".
NOTE: If you want to change the time after the timer is set, you have to start from step 1
Cooking Guidelines
Cooking Tips
• When food comes to the boil, reduce the power setting.
• Using a lid will reduce cooking times and save energy by retaining the heat.
• Minimiser the amount of liquid or fat to reduce cooking times.
• Start cooking on a high setting and reduce the setting when the food has heated through.
Simmering, cooking rice
• Simmering occurs below boiling point, at around 85˚C, when bubbles are just rising
occasionally to the surface of the cooking liquid. It is the key to delicious soups and tender
stews because the flavours develop without overcooking the food. You should also cook
egg-based and flourthickened sauces below boiling point.
• Some tasks, including cooking rice by the absorption method, may require a setting higher
than the lowest setting to ensure the food is cooked properly in the time recommended.
Searing steak
To cook juicy flavoursome steaks:
1. Stand the meat at room temperature for about 20 minutes before cooking.
2. Heat up a heavy-based frying pan.
3. Brush both sides of the steak with oil. Drizzle a small amount of oil into the hot pan and
then lower the meat onto the hot pan.
4. Turn the steak only once during cooking. The exact cooking time will depend on the
thickness of the steak and how cooked you want it. Times may vary from about 2 – 8
(set to 6 minutes)
(set to 3 minutes)
17
Publicité
