Publicité
Les langues disponibles
Les langues disponibles
PREPARE THE HOOD
(NON-DUCTED HOODS ONLY)
Purchase a Non-ducted recirculation KIT from your dealer (Model
DFKTPC50EC).
1. Insert the non-ducted recirculation plenum through the support frame openings.
Fig. 8.
2. Through the support frame openings fit the duct connector to the plenum locking
it with a turning movement. Fig. 9.
3. Fix a 5" duct to the duct connector of the non-ducted recirculation plenum. Fig.9.
4. Mount the 6"/5" adapter above hood. Fig. 10.
(DUCTED HOODS ONLY)
Mount the discharge collar above the hood. Fig. 11.
CONNECT DECORATIVE FLUE
1. Secure the upper flue to the upper support frame with the mounting screws
(2.9x9.5mm).
2. Insert the lower flue moving it completely towards the top and fix it temporarily
with retaining screw (3.9x9.5mm).
DUCT
CONNECTOR
5" DUCT
- 6 -
NON-DUCTED
RECIRCULATION
PLENUM
FIG. 9
MOUNTING SCREWS
(2.9x9.5mm)
FIG. 8
6"/5"
ADAPTER
FIG.10
DISCHARGE
COLLAR
FIG.11
UPPER
FLUE
RETAINING
SCREW
(3.9x9.5mm)
LOWER
FLUE
FIG.12
Publicité
