Buffalo CE228 Mode D'emploi page 3

Telephone Helpline: 0845 146 2887 (United Kingdom)
Pack Contents
The following is included:
• BUFFALO meat slicer
• Blade removal tool
BUFFALO prides itself on quality and service, ensuring that at the time of packaging the contents are
supplied fully functional and free of damage.
Should you find any damage as a result of transit, please contact your BUFFALO dealer immediately.
Assembly
The plastic safety guard has been removed from the appliance to prevent damage during transit.
WARNING: The safety guard MUST be fitted before using this appliance .
BUFFALO accept no responsibility for any injury caused by operation of this appliance without the guard
installed or correctly fitted.
Remove the appliance from all packaging.
1.
Attach the safety guard using the two screws and washers supplied, (see below).
2.
Operation
.
Connect the appliance to the power supply
1.
Set the thickness to the desired level by turning
2.
the Thickness knob anti-clockwise.
Turn the Plate fixing bolt clockwise so the fixing
3.
head touches the plate.
Note: It is important to set the Plate fixing bolt as failure to do so can result in
inaccurate thicknesses when slicing.
• Safety guard
• Screws x 2
Safety Guard
• Washers x 2
• Instruction manual
Carriage
Slice thickness
knob
ON switch OFF switch
UK
2