Publicité
Les langues disponibles
Les langues disponibles
Adjusting the tilt tension
If the monitor is falling forward (screen goes down), loosen the screw by turning it to the left. If
the monitor is falling back (screen goes up), tighten the screw by turning it to the right.
Adjusting the arm tension
To make the arm easier to move, loosen the screws by turning them to the left. To make the
arm harder to move, tighten the screws by turning them to the right.
Caution: Do not remove the screw. The
monitor might fall.
4 mm
2.5 mm
15
Publicité
