AmazonBasics B00MIBN71I Mode D'emploi page 13

Step 6: Insert the cable ties through the loops on the bottom of the upper arms, route the
monitor cables along the upper arms, then loosely secure the cables to the upper arm with the
cable ties. Do not over-tighten the ties. If the ties are too tight and you try to remove them, you
may damage the monitor cables.
Squeeze the tabs on the lower arm covers to remove the covers, route the monitor cables
along the bottom of the lower arms, then replace the covers.
Caution: Before you tighten the cable ties,
adjust your monitors to the highest position.
This will leave enough slack in the cables for
height adjustments.
Lower arm cover
13