Publicité
User Information
Adjustment
Lift rear upholstery (11)
slightly and extract
locking pin (34) followed
by support tube (4).
Refit support tube into
required adjustment
holes in main upright
and refit locking pin.
Lower rear upholstery
back down onto support
tube. Bar holders height
should be adjusted as
required.
Folding for Storage 1
Fit leg attachment
and ensure all other
attachments are
removed. Remove Knob
bolt M10 (33) and bolt
(20). Lift rear upholstery
(11) slightly and extract
locking pin (34) followed
by support tube (4).
Lower rear upholstery to
base.
Folding for Storage 2
(9) (2) (3) (12) (9).
Publicité
