Teac PD-505T Mode D'emploi page 6

About the transportation locking screws
This unit employs a semi-floating structure for the CD mechanism so
that it is not completely fixed to the chassis. For this reason, before
shipment from the factory, transportation locking screws have been
attached through the bottom of the unit to protect the CD mecha-
nism from vibration during transportation.
Before installing the unit
Before installing the unit, remove the two transportation locking
screws.
o Save the transportation locking screws in a safe place because
you will need to reattach them before transporting the unit in
the future.
6
Transportation
locking screws
Before transporting the unit
Before transporting the unit, reattach the two transportation locking
screws removed when the unit was installed.