Publicité
Les langues disponibles
Les langues disponibles
• Place your device with its back on the inductive charger (B).
• The charging process begins as soon as an effective induction eld has been established. The status LED (2)
lights up solid blue and then goes out. The current charge status is displayed on your device.
• If no induction connection can be established, change the position of your device if necessary (B).
• The charging process ends automatically once your device's battery is fully charged.
5. Care and maintenance
Only clean this product using a lint-free, slightly damp cloth and do not use any harsh cleaners. Ensure that no
water is able to enter the product.
Note
Disconnect the device from the mains before cleaning and during prolonged periods of non-use.
6. Warranty disclaimer
Hama GmbH & Co KG assumes no liability and provides no warranty for damage resulting from improper
installation/mounting, improper use of the product or from failure to observe the operating instructions and/
or safety notes.
7. Technical data
Wireless charger
Output (under optimised conditions)
8. Declaration of conformity
Hama GmbH & Co KG hereby declares that the radio equipment type [00187280] is in compliance
with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the
following Internet address:
www.hama.com -> 00187280 -> Downloads.
Frequency band(s)
Maximum radio-frequency power transmitted
4
Input
Dimensions
9 V
5 W / 7.5 W / 10 W max.
108mm x 103mm x 10,5mm
110.60 – 140.00kHz
6.31 dBµA/m at 10 m distance
2.0 A
Publicité
