LENCO DAR-251 Mode D'emploi page 16

3. Press the button to start playing the next tracks on the disc.
4. During playback, press and hold
release it at the point you want to listen to.
5. Press and hold the
When the desired track section is found, release the selected button and normal playback will resume.
REPEAT FUNCTION
The REPEAT button may be used to repeat a single track or repeat all tracks on a compact disc.
1. Press the REPEAT button once during playback, the "REPEAT ONE" symbol will appear on the LCD
display for about 2 seconds. The same track will be repeated over and over.
2. Press the REPEAT button a second time to repeat all tracks. The "REPEAT ALL" sign will appear on the
LCD display for about 2 seconds.
3. To cancel REPEAT PLAY, press the REPEAT button repeatedly until "REPEAT OFF" appears on the LCD
display for about 2 seconds.
PROGRAM FUNCTION
The Program feature may be used to program up to 20 tracks to play in a selected order.
1. While in the stop mode only (CD is not playing), press and hold the PROG button for 2 seconds,
and the LCD display will show the wording "P 01" and "T 01" starts to flash.
2. Press the and
3. Press the PROG button to select and store the track into memory.
4. Repeat step 2 to 3 to select up to 20 tracks.
5. To play the selected tracks (in the program mode), press the
6. Press the button to hear the previous program track or press the
program track.
Note: After all programmed tracks have been played, the CD player will return to the stop mode.
7. To clear the programmed tracks from memory, press
MP3 DISC SECTION
1. Press the POWER button to turn on the unit.
2. Press the MODE button repeatedly to select CD Mode.
3. Close the CD Door and the disc will rotate for a few seconds and then play the 1st track automatically.
4. Press the and
5. To temporarily stop playback, press the
6. Press the button to stop play.
Note: Because MP3 discs have stored more songs, disc access times are a little longer.
Repeat Playing Function
Single Track Repeat
Press the REPEAT button once to repeat a single track. The display appears as "Repeat one".
Whole Disc Repeat
In Play mode, press the REPEAT button 2 times to repeatedly play all tracks on the disc. The display will show
"Repeat All".
To cancel repeat play, press the REPEAT button repeatedly until the "Repeat off" sign appears.
PROGRAM PLAY
The tracks on the disc can be programmed to play in any order (up to 20 can be programmed). Note: this can
only be done while in Stop mode
1. Press the PROG button while in Stop mode. "P01" "F01" will appear on the display and "T001" will flash.
2. Press the or
store in the memory.
3. The first track number is now stored in memory, and the program number changes to "P02", waiting for
or buttons to find a specific passage within the track and
button, the current track will be sped up towards the next track(s).
buttons to allocate the desired track.
buttons to choose a track.
button to select the desired tracks in the album, then press the PROG button to
button.
button twice.
button; to resume, press the button again.
- EN 16 -
button to hear the next