Publicité
Les langues disponibles
Les langues disponibles
B
Using the appliance
Replace the lamp
This product contains a light source exempted of energy efficiency class.
Light source in this product can be replaced by the end user.
Please unplug the appliance before any light source change operation.
The light source shall be removed at the end of the product's useful life, with sorting and
recycling done separately.
Follow below process to replace the lamp)
1. Set the temperature regulation knob at number «0» to switch off the appliance.
2. Unplug the appliance to make sure the appliance is disconnected from main power supply.
3. Remove the screw of the lamp cover.
4. Pull the lamp cover out.
5. Unscrew the lamp.
6. Fit new lamp according to the opposite direction, then replace the lamp cover and screw.
7. Plug in the appliance and regulate the knob to right position.
18
EN
Publicité
