Publicité
Les langues disponibles
Les langues disponibles
Problem
Possible
Cause
The ma-
The guard is
chine
not attached to
stops
the machine.
when you
Heavy cutting
cut.
line is used.
Grass winds
around the mo-
tor shaft or the
trimmer head.
The motor is
overloaded.
The battery
pack or ma-
chine is too hot.
The battery
pack is discon-
nected from the
tool.
The battery
pack is deple-
ted.
English
Solution
Remove the battery
pack and attach the
guard to the machine.
Use only with the
nylon cutting line of
0.095" / 0.080" (2.4
mm / 2.0 mm) diame-
ter.
1. Stop the machine.
2. Remove the battery
pack.
3. Remove the grass
from the motor shaft
and trimmer head.
1. Remove the trim-
mer head from the
grass.
2. The motor will re-
cover to work as soon
as the load is re-
moved.
3. When you cut,
move the trimmer
head in and out of
the grass to be cut
and remove no more
than 8" in length of
the grass being cut
per pass.
1. Cool the battery
pack until its func-
tion returns to normal.
This is best done by
bringing the battery
into the shade or in-
doors.
2. Cool the machine
for approximately 10
minutes. Remove the
battery from the tool
to help the tool cool
down more quickly.
Install the battery
pack again.
Charge the battery
pack.
Problem
Possible
Cause
The line
Lines are wel-
does not
ded to them-
advance.
selves.
Not enough line
on spool.
Lines are worn
too short.
Lines are tan-
gled on spool.
The line
The machine is
keeps
used incorrectly.
breaking.
The grass
Cut tall grass at
winds
ground level.
around
the trim-
mer head
and motor
housing.
The line
The cut-off
does not
blade becomes
cut well.
dull.
Vibration
The line is worn
increases
down at one
obviously.
side and not ad-
vanced in time.
14
LIMITED WARRANTY
BATTERIE • GARANTÍA PARA
HERRAMIENTAS Y BATERÍAS
Greenworks hereby warranties this product, to the
original purchaser with proof of purchase, for a period
of four (4) years against defects in materials, parts
or workmanship. Greenworks, at its own discretion
will repair or replace any and all parts found to be
13
Solution
Lubricate with silicone
spray.
Install more line.
Advance the cutting
line by bumping the
trimmer head.
1. Remove the lines
from the spool.
2. Wind the lines.
1. Cut with the tip of
the line, avoid stones,
walls and other hard
objects.
2. Advance the cutting
line regularly to keep
full cutting width.
1. Cut tall grass from
the top down.
2. Remove no more
than 8" in each pass
to prevent wrapping.
Sharpen the cut-off
blade with a file or re-
place it.
Make sure that the
line on both sides is
normal. Advance the
line.
GARANTIE OUTIL &
EN
Publicité
