Storage - NORDFOREST 1800 Mode D'emploi

900012 Rev. 01 | 09.2017
›
Dismantle the machine into its individual parts and submit all
components to controlled disposal points.
After deactivating and blocking the moving parts, no further residual
risk exists.
When disposing of the capstan winch or its components:
›
Observe the nationally applicable regulations.

Storage

If you wish to temporarily store the capstan winch:
›
Only store the capstan winch in enclosed rooms.
›
Make sure the storage room is well ventilated and dry.
›
Use the original packaging for the capstan winch. If you temporarily
store the capstan winch in its original packaging, protect it from
damage due to dirt, dust or moisture.
If you wish to store the capstan winch for a longer period of time:
›
Drain the tank and leave the motor to run until no petrol mixture is
left in the tank.
›
Thoroughly clean the capstan winch (see "Cleaning and mainte-
nance" on page 84).
›
Lubricate the moving parts (see "Lubricating moving parts" on
page 85).
›
Remove the spark plug (see "Inspecting the spark plug" on
page 88).
›
Drip a few drops of two-stroke oil into the cylinder chamber. We
recommend the following oils:
• Castrol 2T
• Oregon 011-1140
›
In order to distribute the oil, vigorously pull the starter handle a few
times.
›
Screw the spark plug back in (see "Inspecting the spark plug" on
page 88).
›
Only store the capstan winch in enclosed rooms.
Capstan winch 1800, 1200, 400
Storage
91