Anchoring The Capstan Winch - NORDFOREST 1800 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

900012 Rev. 01 | 09.2017
If you wish to fill the tank with the petrol mixture:
Switch the motor off by pressing the on/off switch to "0".
Leave the motor to cool down.
Slowly unscrew the tank cap, so that any overpressure can release.
Clean the filling opening on the tank, so that no dirt enters the tank
and the petrol mixture.
Shake the petrol mixture vigorously before every use.
Fill the tank to no more than 3/4 of its capacity.
To do so use a suitable tool, such as a funnel.
Close the tank cap fully.
Wipe up any spilled petrol mixture immediately.

Anchoring the capstan winch

Damage to the capstan winch due to unsuitable fastening
means!
If the capstan winch is anchored with unsuitable fastening means, it
and your safety devices can be damaged.
Never anchor the capstan winch with a hook, shackle, chain or
another metallic object.
Only use textile fastening slings, e.g. a polyester round sling WLL
2000 kg.
Never anchor the capstan winch at the transport handle or motor
guard.
Only anchor the capstan winch at the fastening eye.
In order to establish force to counter the pulled load, you must anchor
the capstan winch on a sufficiently load-bearing tree or another fixed
object such that it can move freely.
Commissioning and operation
ATTENTION
Capstan winch 1800, 1200, 400
71

Publicité

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

1200400

Table des Matières