Publicité
Les langues disponibles
Les langues disponibles
Register a new handset
All handsets included in the package are already registered to the base unit. Only for separate
handsets/service measures. You can register up to 6 handsets to one base unit.
Note!
This model is GAP (Generic Access Profile) compatible, which means that the handset
and the base unit can both be used with most other GAP compatible units irrespective
of manufacturer. However the GAP protocol cannot guarantee that all functions may be
accessed. Extra handsets will not be available as accessories.
.
Hold down J (base unit) until indicator flashes.
2.
Press
. Scroll to Registration. Press OK.
Enter the base unit's PIN code (e.g. 0000). Press OK.
.
4.
If the registration is successful the unit will return to standby mode within one minute.
Answer machine (only Adapto 8r)
When the answer machine is switched on calls are answered after a set number of rings, your
outgoing message is heard and the caller can leave a message. Total memory capacity is up
to 0 minutes depending on the set sound quality. Most functions can be accessed from both
base unit and handset.
Switching the answer machine on/off
Press 1 (on the base unit) to switch the answer machine on/off. If the base unit's display is
flashing/showing
--
On/Off from the handset
. Scroll to ANS. MACHINE. Press OK.
.
Press
2.
Scroll to TAM ON/OFF. Press OK.
Scroll to desired setting. Press OK.
.
If the handset's display shows
there are new messages, the indicator will flash whether the answer machine is off or on.
Note!
Even when answer machine is OFF it will still answer after 10 rings, please see Remote
activation.
the answer machine is disconnected, or time/date is not set.
with a steady light the answer machine is switched on. If
English
Publicité
