en Additional functions
7.4 Setting the temperature
Setting the refrigerator
compartment temperature
Press the required temperature.
▶
To reach the set temperature, slide
the temperature controller for the
storage container to a position that
is one third from the bottom.
→ Page 20
The recommended temperature in
the refrigerator compartment is
4 °C.
Setting the storage container
temperature
To reduce the temperature, slide
1.
the temperature controller in the
direction.
To increase the temperature, slide
2.
the temperature controller in the
direction.
→ Fig.
9
Setting the freezer compartment
temperature
Press the required temperature.
▶
The recommended temperature in
the freezer compartment is
−18 °C.
8 Additional functions
8.1 Super cooling
With Super cooling, the refrigerator
compartment cools as cold as pos-
sible.
Switch on Super cooling before pla-
cing large quantities of food.
Note: When Super cooling is
switched on, increased noise may
occur.
20
Switching on Super cooling
Press
(Refrigerator compart-
▶
ment).
(Refrigerator compartment)
a
lights up.
Note: After approx. 6 hours, the ap-
pliance switches to normal operation.
Switching off Super cooling
Press
(Refrigerator compart-
▶
ment).
8.2 Super freezing
With Super freezing, the freezer com-
partment cools as cold as possible.
Switch on Super freezing four to
six hours before placing food weigh-
ing 2 kg or more into the freezer
compartment.
In order to utilise the freezer capacity,
use Super freezing.
→ "Prerequisites for freezing capa-
city", Page 23
Note: When Super freezing is
switched on, increased noise may
occur.
Switching on Super freezing
Press
(Freezer compart-
▶
ment).
(Freezer compartment) lights
a
up.
Note: After approx. 54 hours, the ap-
pliance switches to normal operation.
Switching off Super freezing
Press
(Freezer compart-
▶
ment).