Hoover H-WASH 550 H5WPB610AMBC8-S Mode D'emploi page 77

STAIN LEVEL / RAPID / STEAM
LEVEL button
This button allows you to choose between
three different options, depending on the
selected programme:
- STAIN LEVEL
Once the programme has been selected

the wash time set for that programme will
be automatically shown.
This option allows you to choose between

3 levels of wash intensity modifying the
length of the programme, depending
on how much the fabrics are soiled (can
only be used on some programmes as
shown in the table of programmes).
- RAPID
The button becomes
you select the RAPID CARE (14'/30'/44')
programme on the knob and allows you to
select one of three durations indicated.
- STEAM LEVEL
After selecting the STEAM CARE PRO
programme, you can use this button to
choose between three steam treatments of
different intensities, designed for dry or wet
garments and depending on the type of
fabric:
- COTTON (default selection)
This programme is used for cotton
garments. On wet fabrics (e.g., after
washing), it is suitable for relaxing
creases after spinning; on dry fabrics it
is instead designed to achieve the ideal
humidity level for easier ironing.
- SYNTHETIC (press button once)
This programme is used for synthetic
garments. On wet fabrics (e.g., after
washing), it is suitable for relaxing
creases after spinning; on dry fabrics it
is instead designed to achieve the ideal
humidity level for easier ironing.
- DELICATES (press button twice)
These options must be selected before
pressing the START/PAUSE button.
SPECIAL PROGRAMMES button
This button allows you to choose between
three different options (available for some
programmes only):
- ACTIVE WASH
This option (which can be set in several

active when
programs)
energy consumption of the selected
program,
performance unchanged.
ACTIVE WASH is designed for reduced

loads and lightly soiled garments, aiming
to limit the unnecessary waste.
- NIGHT & DAY
This option reduces the intermediate spin

speed to 400 rpm, where applicable,
increase the water level during rinsing
and keep the laundry immersed in water
after the final rinse, in order to spread the
fiber perfectly.
During the drum water retention phase,

the machine is in pause mode.
Press START to end the cycle with the

spin (which can be reduced or removed
with the specific button) and drain phase.
 Thanks to electronic control, the water in
the intermediate phases
silently, making this option very useful for
washing at night.
77
With the help of steam, the cycle
refreshes and relaxes
garments after use. The programme
consists of an initial phase in which the
steam acts and a final phase in which the
excess humidity is removed for immediate
use. The cycle is suitable for dry fabrics.
optimizes
maintaining
creases in
the water and
the washing
is emptied