Garland XTRIM 365 RE Manuel D'instructions page 33

Tighten, repair or replace everything necessary before
using the machine.
6.3.2. TELESCOPIC REGULATION
Sense to
unlock
Direction of rotation
to unlock
1. Loosen the collar by turning in the direction
indicated by the unlock arrow.
2. Lengthen or shorten the pole to the desired length.
3. Tighten the collar by turning in the direction
indicated by the locking arrow.
Make sure you have tightened the collar tightly before
starting the machine.
6.3.3. WORKING ANGLE REGULATION
Press the head rotation button
and adjust the desired angle.
6.3.4. ENCENDER Y APAGAR
Direction of rotation
to lock
Turning on the machine:
Connect the machine to the electrical network.
Then press the safety button and, without releasing it,
press the accelerator trigger.
Disconnection of the machine:
Release the throttle trigger, if you are not going to use
it for a long time, unplug it.
continue to rotate for a few moments due to inertia.
Wait until the cutting tool stops before performing
maintenance on the machine or transporting it.
33/104
Accelerator trigger
After turning off the machine, the cutting tool will
English
Safety button