Leviton OPT-X Mode D'emploi page 4

REQUIRED HARDWARE AND TOOLS
Mounting screws, wall anchors, washers as appropriate
Small Magnetic Torpedo level
Powered drill or screw driver
Scissors or safety blade utility knife
#8 x 1/4" machine threaded screws (if stacking multiple enclosures)
Double-sided Adhesive Tape *sold seperately (if using the optional magnet kit)
CONFIGURATIONS
1) Field or Pre-terminated cabling used with SDX adapter plates
2) Use with pre-terminated MTP cabling and SDX cassettes
3) Pigtail splicing used with SDX adapter plates
Page 4 of 30 DI-000-5WMNT-20C