Publicité
Les langues disponibles
Les langues disponibles
MAKING MINOR ADJUSTMENTS
TO THE DOORS
A level refrigerator is necessary for getting the
doors perfectly even.
Make sure your refrigerator is level before you
begin.
If you need help leveling, review the previous
section on leveling the refrigerator.
When the door of the freezer is higher than
Adjustment part
The process for adjusting each door is the same.
Open the doors and adjust them, one at a time, as
follows:
1. Unscrew the nut ( 1 ) from the lower hinge until
it reaches the upper end of the bolt ( 2 ).
When you release the nut ( 1 ), make sure
that you use the Allen wrench provided
( 3 ) to loosen the bolt ( 2 ) in a counter-
clockwise direction.
You should then be able to unscrew the
nut ( 1 ) with your fingers.
DA68-02966A-05.indb 16
2. Adjust the height difference between the doors
by turning the bolt ( 2 ) clockwise (
counter clockwise (
the fridge
When you turn clockwise (
door will move up.
3. After adjusting the doors, turn the nut ( 1 )
clockwise (
end of the bolt, then tighten the bolt again with
the wrench ( 3 ) to fix the nut in place ( 1 ).
If you do not secure the nut firmly, the bolt
may release.
(3) Wrench
(2) Bolt
(1) Nut
English - 16
) or
).
(3) Wrench
(2) Bolt
), the
) until it reaches the lower
(3) Wrench
(2) Bolt
(1) Nut
2018. 7. 9.
5:06
Publicité
