Moulinex Turbo Cuisine Maxi CE7788 Manuel D'utilisation page 117

Please refer to the figures from Quick Start Guide
(from Fig.25 to Fig.36)
Stew program
• Place the ingredients in the cooking pot and completely close
and lock the lid.
• Turn the control panel knob to the right to reach Stew program
. The screen displays the default cooking time.
• Optional: Press and set the desired time by turning the
control panel knob to the right (to increase time) or to the left
(to decrease time).
• Press to start the cooking program.
• The appliance starts the pre-heating phase. The screen displays
alternatively &
turns on.
• When the pre-heating phase is completed, the appliance swit-
ches automatically to cooking phase. The screen displays the
count down and the cooking in progress light indicator
on.
• During cooking process, pressure builds up in the appliance
and pushes the float valve up. The under pressure light
indicator turns on to notify that the lid cannot be opened
without releasing the pressure first.
• At the end of the count down, the appliance beeps and the
screen displays .
• After a few seconds, the appliance will automatically switch to
keep warm phase. The screen displays
warm light indicator turns on.
• Press for 3 seconds to stop the program at any time.
224
and the pre-heating light indicator
and the keeping
Soup program
• Place the ingredients in the cooking pot and completely close
and lock the lid.
• Turn the control panel knob to the right to reach Soup program
. The screen displays the default cooking time.
• Optional: Press
control panel knob to the right (to increase time) or to the left
(to decrease time).
• Press to start the cooking program.
• The appliance starts the pre-heating phase. The screen dis-
plays alternatively
indicator
• When the pre-heating phase is completed, the appliance
switches automatically to cooking phase. The screen dis-
plays the count down and the cooking in progress light
indicator
turns • During cooking process, pressure builds up in the ap-
pliance and pushes the float valve up. The under pressure
light indicator
ned without releasing the pressure first.
• At the end of the count down, the appliance beeps and the
screen displays
• After a few seconds, the appliance will automatically switch
to keep warm phase. The screen displays
warm light indicator
• Press for 3 seconds to stop the program at any time.
Stir-Fry program
• Turn the control panel knob to the right to reach Stir-Fry pro-
gram . The screen displays the default cooking time.
and set the desired time by turning the
& and the pre-heating light
turns on.
turns on.
turns on to notify that the lid cannot be ope-
.
turns on.
EN
and the keeping
225