Publicité
Les langues disponibles
Les langues disponibles
from 00-01-02......23-24.It is the programmed time to switch the machine. The
programmed time will be cancelled when to switch compressor manually each time.
The programmed time remains unchanged if the machine stops to work due to
water full or during defrosting.
WATER DRAINAGE
When the drainage tank is full, the tank full indicator light will turn on, the operation will
stop automatically and the buzzer will beep 15 times to alert the user, that the water need
to be emptied from the drainage tank.
EMPTYING THE DRAINAGE TANK
1.
Lightly press on the sides of the tank with both hands and pull the tank out gently.
2.
Discard the collected water.
Fig. 5
NOTE
1.
Do not remove the float from the water tank. The water full sensor will no longer
be able to detect the water level correctly without the float and water may leak
from the water tank.
2.
If the drainage tank is dirty, wash it with cold or lukewarm water. Do not use
detergent, scouring pads, chemically treated dust cloths, gasoline, benzene,
thinner, or other solvents, as these can scratch and damage the tank and cause
water leakage.
Fig. 4
Fig. 6
4
51
Publicité
