Publicité
Les langues disponibles
Les langues disponibles
ABOUT THE SHARK ION ROBOT™
Charge Indicator Lights
Error Indicator Light
Front Bumper
Dock Button
Dust Bin Release Button
Side Brush
Charging Contact
Side Brush Post
Battery Door
Drive Wheel
Multi-Surface
Brushroll
s h a r kc l e a n . c o m
Wi-Fi Indicator Light
!
Clean Button
Dock
Spot
Max
Max Button
Power Button
Cliff Sensors
Side Brush
Front Caster
Wheel
Side Cliff
Sensor
Robot Dust Bin
and Filter
ABOUT THE SHARK ION ROBOT™
With Auto-Sense™ Navigation, your robot uses an array of sensors to navigate around walls, furniture legs,
and other obstacles while it cleans. The robot may gently bump into obstructions or linger in one spot, and
it may not cover every area in a single cleaning. For best results, prepare your home as indicated below,
and schedule a daily cleaning to ensure all floor areas are regularly maintained.
Robot Traps
Robot Friendly
CORDS AND OBSTRUCTIONS
Before cleaning, clear away cords and other
obstructions.
RETURNING TO DOCK
If your robot roams too far, it could have trouble
finding the Charging Dock. It may be helpful to
block off part of your home, or to add a second
dock (available at sharkaccessories.com)
LOW-CLEARANCE FURNITURE
To prevent your robot from becoming trapped,
use furniture risers or BotBoundary strips.
10 cm
STAIRS WITH CARPET RUNNER
For your robot's cliff sensors to work properly,
all runners, rugs, or carpets must be at least
10 cm (4 inches) from any stairs (or extend over the
edge of the stairs).
If a runner, rug, or carpet edge is less than
10 cm (4 inches) from the stairs and can't be
moved, use a BotBoundary® strip to block off
the stairs. BotBoundary strips are available for
purchase at sharkaccessories.com
s h a r kc l e a n . c o m
Publicité
