Publicité
Les langues disponibles
Les langues disponibles
KanUK OrIGInal tecHnical Data anD Dimen�ion�
Emissions
Kanuk® Original stoves meet the requirements of the first BImSchV stage 2, as well as according to Austrian law Art.
15a B-VG and can be operated as room heaters with flat firing without any restrictions or retrofitting.
Type plate
The type plate is located on the radiation protection plate on the back of the stove and must not be removed. This
confirms the inspection of the stove and is necessary for the acceptance, as well as annual inspection of the chim-
ney sweep.
EN
technIcal Data anD DIMensIOns
Kanuk® Original
Nominal heat output (kW)
Room heating capacity (m³)*
Flue pipe connection (mm)
Dimensions H x W x D (cm)
Efficiency (%)
Viewing window (cm)
Exhaust gas temperature Ø (°C)
Exhaust gas mass flow (g/s)
Minimum chimney draught (Pa)
Max. Log length (cm)
Weight (kg)
Outside air connection (mm)
DIN EN number
Operating mode closed
Primary, secondary air
Window rinsing
Logs, wood briquettes
1st BImSchV Level 2
Ecodesign 2022
CE Mark
* depending on building fabric, insulation, etc.
Errors, misprints and technical changes reserved.
108
7 kW
6,7
180
120
63 x 45 x 69
85,5
24 x 14
171
6,74
14
25
74
80
DIN EN
13240:2005-10
Kanuk GmbH • Obercunnersdorfer Str. 4 • 01774 Klingenberg
9,5 kW
10 kW
9,5
10,3
244
280
120
160
63 x 45 x 69
67 x 54 x 82
86,6
83,4
24 x 14
24 x 14
177
198
8,44
10,77
14
17
25
36
74
107
80
100
DIN EN
DIN EN
13240:2005-10
13240:2005-10
13 kW
12,7
325
160
67 x 54 x 82
81,1
24 x 14
180
16,75
18
36
107
100
DIN EN
13240:2005-10
Publicité
