Publicité
Les langues disponibles
Les langues disponibles
3
Trim Installation
A.
4
3
Slide O-ring (1) over cartridge and the
bonnet nut (2). The O-ring, which acts as
a spacer to steady the sleeve, should rest
behind the bonnet nut.
If your model requires a spacer (3), insert
it into the sleeve (4) and push it to the
front. Slide the sleeve over the cartridge,
body and O-ring.
C.
2
Using an Allen wrench to secure the set
screw (1), install the handle (2) onto the
stem. Insert plug button (3) (if your model
has one) into set screw hole.
3
4
2
1
1
3
B.
3
4
Escutcheon Installation for
Models T140335, T14044T
7
Secure the escutcheon (1) to the bracket
(2) using the 2 screws provided (3). Do not
overtighten escutcheon screws. If you are
installing the models T140339: Thread the
cover (4) onto the escutcheon (1).
For models T140335, T140440T:
Install bracket (5) over the cartridge body using
the 2 screws provided (6). Install escutcheon (7)
by placing it over the bracket.
5
Installation
1
5
6
88741
2
Rev. D
Publicité
