Yamaha MCR-B270D Mode D'emploi page 19

Listening to DAB stations (CRX-B370D only)
Connect the antenna supplied with the unit (
Initial scan
TUNER
Press TUNER repeatedly to select [DAB].
• Initial scan starts automatically when you select [DAB] for the
first time.
• When scanning is completed, the number of receivable DAB
stations is shown in the front panel display momentarily, and
the first station stored is played.
/
a d
Tuning in DAB stations
1
Press TUNER repeatedly to select [DAB].
/
q w
When the unit cannot receive the DAB signal, "Off Air" is
shown in the front panel display.
OPTION
2
Press ee /rr to select a DAB station.
D A B
S T A T I O N 1
/
e e r r
p. 14) to receive DAB stations.
TUNED 2nd
STEREO
Note
• Initial scan is also available from the option menu.
1
Press OPTION when DAB is selected as the input source.
- The option menu is shown in the front panel display.
2
Press q/w to select [Initial Scan] and press a/d.
- Initial scan starts and finishes automatically.
• If an initial scan is performed, stored DAB station information and
preset DAB stations are cleared.
• This unit can receive only Band III DAB frequencies.
Frequency in MHz/Channel label
Listening to music
19
En